OSHA National Emphasis Program: Respirable Crystalline Silica

Overview

OSHA directs increased inspection and enforcement resources toward industries with significant crystalline silica exposure risks. Employers in construction, stone cutting, glass manufacturing, and foundries must comply with the permissible exposure limit of 50 μg/m³ (8-hour TWA) under 29 CFR 1926.1153 (construction) and 29 CFR 1910.1053 (general industry).

This enforcement action underscores the importance of proactive compliance and self-auditing. Below, we break down what was cited, why it matters, and what employers in similar industries should do now.

What Was Cited

Violations Cited

Based on the enforcement action details:

• OSHA directs increased inspection and enforcement resources toward industries with significant crystalline silica exposure risks
• Employers in construction, stone cutting, glass manufacturing, and foundries must comply with the permissible exposure limit of 50 μg/m³ (8-hour TWA) under 29 CFR 1926.1153 (construction) and 29 CFR 1910.1053 (general industry)

Who Is Affected and Where This Applies

This is a federal-level action affecting employers nationwide across all 50 states and U.S. territories.

Industries affected: construction, manufacturing. Employers in Construction, Manufacturing should prioritize their review of this update and assess whether their current programs meet the new requirements.

Compliance Timeline

Background and Context

The OSHA Regulatory Landscape

The Occupational Safety and Health Administration (OSHA) enforces workplace safety standards under the OSH Act of 1970, protecting approximately 130 million workers at 8 million worksites nationwide. OSHA sets and enforces standards, provides training and outreach, and conducts workplace inspections. For fiscal year 2025, OSHA's maximum penalties were adjusted to $16,550 per serious violation and $165,514 per willful or repeat violation — with annual inflation adjustments continuing to raise these ceilings.

OSHA enforcement priorities shift based on emerging hazards, workplace fatality trends, and National Emphasis Programs (NEPs). In recent years, the agency has intensified its focus on heat illness prevention, fall protection in construction, respirable crystalline silica, and workplace violence in healthcare. Employers in high-hazard industries should monitor NEP announcements closely, as these programs direct OSHA area offices to conduct targeted inspections in specific industries or for specific hazards even without a complaint or fatality trigger.

Why This Matters for Employers

Enforcement actions are one of the clearest signals of regulatory priorities. When OSHA or another agency cites specific violations, assesses penalties, and publicizes the case, it serves as both a deterrent and a roadmap. Employers in similar industries — particularly those with comparable operations, equipment, or processes — should treat this case as a direct prompt to audit their own programs.

The violations cited here point to specific standards that the agency considers high-priority for enforcement. Historically, citations in one region often precede increased inspection activity in the same industry nationwide as area offices share enforcement intelligence and target similar hazards.

Industry focus: This primarily affects employers in the Construction and Manufacturing sectors. Organizations in these industries should evaluate their current compliance posture and determine if existing programs meet the updated requirements.

For employers reviewing their own practices, the key question is not whether a similar inspection will happen — it's whether your documentation and programs would withstand one. OSHA inspections can be triggered by employee complaints, referrals from other agencies, or programmed inspections under National Emphasis Programs.

Penalties and Enforcement Context

Specific penalty amounts were assessed in this case. Under current OSHA penalty schedules, serious violations carry a maximum penalty of $16,550 per violation, while willful or repeat violations can reach $165,514 per violation.

What Employers Should Do Now

BlueHive provides OSHA compliance resources nationwide and tracks this topic through our OSHA compliance hub.

Frequently Asked Questions

Related Compliance Updates

• OSHA Electronic Recordkeeping Requirements — OSHA, Federal (Dec 2024)
• Roofing Company Cited for Fall Protection Violations — OSHA, Texas (Nov 2025)

---

Source: Enforcement Action · Verified 2026-03-11

This article is part of BlueHive Compliance Watch, which monitors occupational health regulations across all 50 states and federal agencies. Browse all state profiles → · View all compliance articles →